Duux DECT baby monitor Guide de l'utilisateur télécharger pdf (Page 6)

10 11

Note: make sure that the baby projector is on a ﬂat and stable surface to prevent falling.

Note:

make sure that the baby projector is within 2 metres reach of the walls/ceiling in

order to have clear projections.

1. Put the power adapter in the power socket

2. Put the adapter into the baby projector (back side)

3. Switch on the baby projector by pressing the on/oﬀ button

Note:

always switch oﬀ the baby projector ﬁrst before disconnecting the adapter.

The baby projector has a built-in voice activation function that automatically activates the

projector when the baby starts crying (at night). After activation, the projector will

automatically turn oﬀ again after 30 minutes.

1. Press this button once to switch on the baby projector.

2. Press this button again to also activate the nightlight.

3. Press this button again to switch oﬀ the baby projector.

Use this button to change the projecting animation.

1. Press this button once to only project a solid blue color.

2. Press this button once to only project a solid red color.

3. Press this button once to only project a solid green color.

4. Press this button again to switch oﬀ the projecting function.

Note:

what if you only want to use the nightlight without projecting? Press the icon twice

to activate the projector and the nightlight. Then press the icon 4 times to switch oﬀ the

projecting function.

Note:

the nightlight and projector functions will automatically stop after 30 minutes (your

child should be asleep by then…)

3 installation & use

functions

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Duux DECT baby monitor Guide de l'utilisateur Page 6